(04-15-2012) A little update on R2

The past few weeks I've been working on R2 when time allows. The lights have been completed (video) and the exterior dome is being sanded currently - slowly but surely. Last night my son and I wanted to see how R2's body is coming along, so I popped out the body panels and fitted what body pieces I have at the current time to see how it looks. Nothing is mounted, except for the large data port, but it's encouraging to see R2 taking shape to some small degree.

(03-08-2012) The needle files...

I spent some time with some "jumbo needle files" and the dome this evening. Everywhere a panel was cut on the outer dome created a small lip on the inside of the outer dome. I used the needle files to file down the inner edge of all of the panels at a 45 degree angle. The result is a very nice fit of the outer dome to the inner dome, especially at the top pie panel area. The bottom of the outer dome seems a bit stretched, but maybe it's fixable by slightly bending the bottom frame of the outer dome, or if that doesn't work the old "duct tape" trick may need to be employed. I'm very happy with the fit now. Marking and cutting the inner dome are next. I'm very nervous about cutting it up.

A little video of the lights in action

(03-04-2012) Teeces Lighting is 90% done

Today I was able to finished soldering up the all of the boards, except for the remaining LED's - those will need to be soldered in a checkerboard pattern to go with Milkbone's alterations to do the "slide" effect. Joymonkey's kit is super easy to put together, and it has great printed instructions as well as videos to help in assembly.

(03-03-2012) Rear Logic Board is done

Today the rear logic board is done, tested and working well. The only problem I had was several green LEDs in backwards, and they stayed lit all the time instead of flashing. It took a while to use solder braid and remove the offending LEDs, but it was very fun to build. Looking forward to finishing up the lights in the next week or so. I also want to make the PSI changes M1lkbone made to give it a more correct look.

(02-28-2012) Teeces lights arrive and assembly begins

The lights (Teeces V3) for R2 arrived on Monday (2-27-2012), but I had a job that evening and I was unable to get started on them, but last night (2-28-2012) I had a little time to get started on the rear logic board. I need to get a battery holder, power regulator and install some lights to test it. Sorry for the blurry picture, all I had was my phone to get a pic.

Dome works continues

I did more filing and sanding and now the dome is completely de-burred and smoothed to my satisfaction. Next step is to fit the inner and outer domes and find the best fit, make my marks on the inner dome and the cutting begins. Very nervous to cut on such a nice piece.

And in the the new parts front: the radar dome eye lens came today (the big eye in the middle of R2's forehead).